Resurfacing & Repolishing Benchtops, Vanities and Bartops

Resurfacing Benchtops, Vanities and Bartops - Full Polish

The Marble Man team does the resurfacing of benchtops, vanities and bartops without disturbing your kitchen, and within days, and in a very cost effective manner. Our tradesmen will be tidy and clean up after themselves.

The resurfacing process is used when the surface is scratched and has deep etch marks.  It is the most common type of restoration used for benchtops and bar tops. The resurfacing can be used on marble, limestone, onyx and travertine and if used will bring the bench tops up to as good as new again. 

To resurface the stone benchtops we use diamond-impregnated pads with special wet polishing machines. The resurfacing of benchtop procedure involves the grinding of the marble, working up through a number of grits to a final polish. The whole benchtop is then polished using our wet diamond-polishing compound, which will return a natural high-gloss to the marble benchtop (without the use of waxes).  The result of this resurfacing process brings the stone benchtop back to 100% of its original glossy finish. 

Benefits:

• Removes all scratches, etching and dull areas.
• Returns a natural high gloss to the benchtop surface again.
• The area will be easier to keep clean.
• We give you a natural glossy finish without the use of waxes.
• Cost effective.

Resurfacing Benchtops, Vanities and Bartops – Honed Finish

The resurfacing process for a honed finish is used when a duller honed finish is required for benchtops and bar tops. This type of resurfacing can be used on marble, limestone, onyx and travertine and if used will bring the bench tops up to as good as new again. This is used to produce a lower maintenance and more economical finish to high use benchtops. Sealing after honing is required as the pours of the stone are left open during the honing process.

To resurface the stone benchtops we use diamond-impregnated pads with special wet polishing machines. The resurfacing procedure involves the grinding of the stone, working up through a number of grits to a honed finish. Adjacent walls and cupboards are masked off so that water-based slurry produced by the polishing machines does not damage those areas. The result of this resurfacing process brings the stone benchtop to an evenly honed smooth surface.

Benefits:

• Removes all scratches, etching and dull areas.
• Returns a brand new natural honed finish to the surface again.
• The area will be easier to keep clean.
• Cost effective.

Repolishing Benchtops, Vanities and Bartops

The re- polishing process is used when only light scratches and or etch marks have occurred to the surface of the benchtop or bar top. It can be used on marble, limestone, onyx and travertine and if used on only light damage this will bring the bench top or bar top up to as good as new again.  The re-polishing process is more economical than a full resurface.

Polishing the marble bench tops involves lightly resurfacing them using a light dry abrasive. This will remove all smaller scratching, and light etching on the surface of the stone. The whole bench top is then polished using our wet diamond-polishing compound, which will return a natural gloss to the marble bench top (without the use of waxes). This is why we insist on using the light abrasive prior to the diamond-polishing compound. This brings the bench top back to approximately 70% - 100% of a new bench top depending on damage.

Benefits:

• Removes small scratches and etching on the stone surface in the grinding process.
• Returns a natural gloss to the dull and etched stone surface again.
• The area will be easier to keep clean.
• We give you a natural glossy finish without the use of waxes.
• Area will be longer lasting than waxy finishes.

The Marble Man Advantage

The Marble Man has continued to grow since it was founded in 1992 by Shaun Roberts, current owner and Managing Director.

The Marble Man now has a team of stone restoration specialists servicing BRISBANE | GOLD COAST | SUNSHINE COAST | NORTHERN NSW | TOOWOOMBA and other areas throughout QLD and NSW.  It is the largest specialised stone restoration company in Australia and continues to grow due to its reputation for providing quality service.

Call their office today on 1300 627 626 to arrange an obligation free stone restoration quote.
For more details, visit Website.